YS-GT High Precision Fully Automatic Solder Paste Printer for PCB
The YS-GT Fully Automatic Solder Paste Printer delivers exceptional
precision and efficiency for PCB assembly applications, featuring
advanced automation and robust performance characteristics.
Machine Performance Specifications
| Parameter | Specification |
|---|
| Repeat Position Accuracy | ±10μm @6σ, CPK≥2.0 |
| Print Accuracy | ±18μm @6σ, CPK≥2.0 |
| NCP-CT (excluding cleaning and printing) | <7.5 sec |
| HCP-CT (including cleaning and printing) | 18s/pcs |
| Process CT | 4min |
| Transfer Line CT | 2min |
Substrate Processing Parameters
| Parameter | Specification |
|---|
| Maximum board size | 510×510mm (Optional upgrade to: 610×510mm) |
| Minimum board size | 50×50mm |
| Board thickness | 0.4~6mm |
| Camera Mechanical range | 528×510mm |
| Maximum board weight | 5kg |
| Board edge clearance | 2.5mm |
| Board height | 23mm Beyond trait items pin |
| Transport speed | 900±40mm |
| Maximum Transport speed | Segmented control, 1500mm/s (Max) |
| Transport direction | One stage |
Printing Parameters
| Parameter | Specification |
|---|
| Print Speed | 10~200mm/sec |
| Print Pressure | 0.5~20Kg |
| Print Mode | One/Twice |
| Squeegee Type | Rubber/Squeegee Blade (angle 45/55/60) |
| Snap-off | 0~20mm |
| Snap-Speed | 0~20mm/sec |
| Template frame size | 470×370mm~737×737mm |
| Steel mesh positioning method | Automatic Y-direction positioning |
Cleaning Parameters
| Parameter | Specification |
|---|
| Cleaning System | Dry, Wet, Vacuum three modes |
| High speed cleaning | Integrated & weave cleaning |
| Cleaning system | Side spray type |
| Cleaning stroke | Automatic generation |
| Cleaning position | Post cleaning |
| Cleaning Speed | 10-200mm/sec |
| Cleaning fluid consumption | Auto & Manually adjustable |
| Cleaning paper consumption | Auto & Manually adjustable |
Vision System Parameters
| Parameter | Specification |
|---|
| CCD FOV | 10×8mm |
| Camera type | 130 Thousand CCD Digital camera |
| Camera System | Lock up/down optics structure |
| Camera Cycle time | 100ms |
| Fiducial mark types | Round, square, diamond, cross, Pad and profile |
| Mark size | 0.1-6mm |
| Mark number | Max: 4pcs |
| Stay away number | Max: 1pcs |
Machine Technical Parameters
| Parameter | Specification |
|---|
| Power Source | AC: 220±10%, 50/60Hz 2.2KW |
| Air Pressure | 4~6Kgf/cm² |
| Air Consumption | About 5L/min |
| Operating Temperature | -20℃~+45℃ |
| Working environment humidity | 30%~60% |
| Machine dimension (without Tower light) | 1500(H)mm |
| Machine Length | 1240(L)mm |
| Machine Width | 1410(W)mm |
| Machine Weight Approx | Approx: 1100Kg |
| Equipment load bearing requirements | 650Kg/m² |
Equipment Model & Dimensions
Equipment Model: YS-GT
Size: 1240(L) × 1410(W) × 1500(H)mm
Power and Gas Supply Requirements
Main power supply: AC: 220 ± 10%, 50/60HZ 3KW stable power supply
with rated current, plug type: British system.
Main gas supply: A stable industrial gas source with a pressure of
4.0-6kgf/cm². The diameter of the gas pipe is 6mm/8mm/10mm/12mm,
and the front joint of the gas pipe is universal. The rear joint
only needs to match the size of the gas pipe.
Machine weight: approximately 1100Kg
Equipment Usage Environment
- Workshop temperature: -20℃~+45℃
- Workshop humidity: 30-60%
- Static electricity protection: ESD grounding and static electricity
protection are required
- Floor load-bearing capacity: If the equipment is not used on a flat
floor, please pay attention to the floor sinking load-bearing
capacity, which must be ≥ 650kg/m²
